Would you like to buy a brine inhalation technique?
Then we have the right INTENSIVE product for you!
Our system nebulises not only brine solution but also different teas!
Thus, our brine inhalation technique is also to be used as a tea inhalation technique for your steam bath or steam shower
You already have a steam shower and do not want to miss the benefits of brine nebulization?
Then simply order our retrofit kit for the SOLE nebulisation and do something good for your health!
However, if you want to buy a brine inhalation technique you will be well informed about the technique. There is the brine fogging with ultrasonic mist (little fine mist, system like the mist bowl) or our brine nebulizer system via compressed air (very intense! In about 20 minutes a whole liter is atomised !!).
Our KEIMFREIES system is so intense that it is NOT SUITABLE for infrared cabins and saunas (we can not guarantee this). HOWEVER, for steam baths and steam showers, our brine inhalation technique is best suited.
In the following video you can see the intensive brine fogging of SOLEUM GmbH. Observe in which short time (from 1 minute!) Already forms extreme brine mist in the whole steam room.
In about 3 minutes, the steam bath steamed in the finest brine mist. In the stainless steel container fits 1 liter brine solution (1-3%) or even tea inside. The salt can also be added to the tea and so you fog both!
Buy Brine steam inhalation technique: short description
The special feature is the generation of brine fog (or tee fog) As an alternative, healing teas from the pharmacy can also be atom,ized, which enhance the product novelty to a very private inhalation cabin.
The aerosolized brine is not only good for breathing. Salt on the skin increases perspiration and cleansing. The skin is actually cleansed pores, cared for and the precipitated salt has a very positive effect on troubled skin.
At the same time, it forms a natural protection and supports the acid mantle of Haut.Lieferumfang: nebulizer compressor, misting nozzle, 5m air hose blue, Niro container, without control (eg own switch use) Installation is easy! In principle, you make yourself a “switched” socket (eg via a light switch in front of the cabin)
The electrical connection must be carried out by a licensed electrician. If you want to retrofit the inhalation technology at a later date, this is very easy! These are just a few steps: you just have to:
1.) make a 25mm hole in the ceiling (there will be the later nebulizer nozzle placed – see picture below)
2.) mount a support part for the brine tank on the wall (not included, eg a glass platform)
4.) Connect the misting unit with the nebulizing nozzle using the supplied air hose.
5.) Silicone nozzle to ceiling The nebulizer compressor could be positioned 10m away. The length of the air hose included is 5m. If you need a longer cable, please indicate this when placing your order! This will be switched ON or OFF either:
at the brine compressor itself
with radio socket
with normal on / off switch in front of the cabin
with stainless steel switch and 12V relay IN the cabin